LED + CMH + HPS All From One Controller The ILUMINAR Lighting Touch+ Controller controls two zones or two separate rooms of lights within a 24-hour cycle.
The controller turns groups of lights on and off to simulate sunrise and sunset for your plants, as well as applying several other functions like overheat protection, all from an easy-to-use touchscreen control.
Iluminar Touch+ Grow Light Controller
Iluminar Product Documents
Iluminar Touch+ Grow Light Controller Spec Sheet-https://assets.iluminarlighting.com/pdf/SPECSHEET-TOUCH-PLUS-CONTROLLER.pdf
Iluminar Touch+ Grow Light Controller Instruction Manualhttps://assets.iluminarlighting.com/pdf/MANUAL-Touch-Plus-Controller-Manual.pdf
The ILUMINAR Touch+ Controller will now allow you to control up to 60 lights per zone or room, with two channels you can control up to a total of 120 lights. This will take even your beginner garden to the commercial level, all of these features packed into the ILUMINAR Touch+ Controller.
Not only can you control the lighting schedule, but the TOUCH+ Controller’s rich feature set will give indoor horticulturalists levels of control previously only available to the largest commercial facilities.
What comes in the box?
- Temperature Sensor Cables
- Data Cables
- Telephone Wire (3m x2)
- Mouting Screw & Wall Adapters
- Plug Adapter
Features & Benefits of the Touch+ Controller
The main difference with the Touch+ and the older Touch is greater dimming control. The old Touch controller could only control LEDs down to 50% dimming. The new Touch+ Controller can control dimming on LEDs all the way down to 20%
- LED + CMH + HPS All From One Controller
- Up to 120 Units, 60 fixtures per zone
- Control 2 Independent Rooms
- Auto Temperature Shut-Down
- Sunrise / Sunset Effects
- Battery Backup to Save Data
- Dual Temperature Zone input for High Heat Dimming
- Dual Temperature Probe Inputs
- Touch Screen Technology
- RJ9 to RJ14 cable included
The Touch+ Controller is designed to control two light groups in any given area. The controller uses 0-10V adjustable DC voltage to control ballast & LED. The controller operates on a 24-hour time cycle. The controller also has the ability to simulate the sunrise and sunset cycle from 10-60 minutes.
Each of the two-lighting group channels has a room overheat protection function that can be set as needed. You can use the LCD touchscreen to easily view and modify the current settings for each channel. The screen will automatically turn off after 45 seconds of no use to protect plants from interruption of the light cycle. Moreover, the Touch+ Controller is portable, easily operated, and installed.
Iluminar Touch+ Controller Specs:
Dimming Range 50%-115% for HID/20%-100% for LED Max lights per controller 120 Units Max lights per zone 60 Max cord dist per zone 180 meters Max output per zone 20mA Max control voltage 11.5V HID / 10V LED Input Power 5 V DC (1000 mA Minimum) Operating Temperture Range 70°F-120°F Operating Humidity < 90% Display LCD Touch